Saw Table Wood at a glance: 12 colourways, 2–4 mm thick, sheet sizes 1200×300 · 1360×600 · 1500×600 · 1200x3000mm, 3.0–10.5 kg/m², A2 class (GB 8624, factory tested). MOQ 200 m² per colour, lead time 15–25 business days.
What the Saw Table Wood Series Is
Like every TooFlexi panel, Saw Table Wood is a mineral composite formed by mould pressing and 3D surface technology, not a slice of quarried stone bonded to a backing. That is what keeps the weight at 3.0–10.5 kg/m² — roughly 80% lighter than natural stone — and it is also why colour and structure stay consistent from batch to batch, which quarried stone cannot guarantee.
Saw Table Wood Colour Range — All 12 Codes
Measured across the actual panel images, the 12 colourways fall into 8 tone families — Warm Off-White, Off-White, Light Grey, Mid Grey, Charcoal, Cream, Warm Beige and Tan. Lightness runs from Warm Off-White (#F3F2EF) to Charcoal (#303030), so the series covers both high-key and low-key schemes.
JT2005Warm Off-White
JT2052Off-White
JT2025Light Grey
JT2054Cream
JT2056Warm Beige
JT2221Light Grey
JT2206Light Grey
JT2058Warm Beige
JT2089Tan
JT2031Mid Grey
JT2038Charcoal
JT2043CharcoalEvery code above opens its own specification page with full thickness, size and application data. Not sure which to shortlist? Order a swatch set and compare them in your own lighting.
Technical Specifications
| Series | Saw Table Wood (Simulation Series) |
|---|---|
| Colourways in production | 12 |
| Thickness | 2–4 mm |
| Sheet sizes | 1200×300 · 1360×600 · 1500×600 · 1200x3000mm |
| Weight | 3.0–10.5 kg/m² (approx. 80% lighter than natural stone) |
| Material | MCM flexible stone (mineral-based composite) |
| Fire classification | A2 class (GB 8624, factory tested); can be specified to meet EN 13501-1 A2-s1,d0 |
| Minimum bend radius | 200 mm |
| Adhesive consumption | approx. 3–4 kg/m², polymer-modified |
| MOQ | 200 m² per colour |
| Lead time | 15–25 business days |
Where Saw Table Wood Panels Are Specified
Saw Table Wood is used for hotel lobbies and feature walls, restaurant and retail interiors, office reception areas, residential accent walls, bathroom and wet-area surrounds (non-immersed), elevator lobbies and column wraps. Because the material is A2 class (GB 8624, factory tested), it is also accepted on high-rise exteriors and public buildings where combustible cladding is restricted.
Installation Notes for 2–4 mm Saw Table Wood Panels
Thickness in this series varies with the relief: shallow textures are pressed thinner, deep textures thicker, across a 2–9 mm range. Thinner sheets bend to a 200 mm radius; the deeper ones should be kept to flat or gently curved substrates. Bond with a polymer-modified adhesive at roughly 3–4 kg/m² to cement board, plasterboard, prepared masonry or sound existing tile, and cut with a utility knife or angle grinder — no wet saw, no specialist tooling.
No steel keel and no structural reinforcement are needed at 3.0–10.5 kg/m². A single installer can handle large formats unaided, and a typical 200 m² area is completed in 2–3 days.
Frequently Asked Questions
How many colours does the Saw Table Wood series come in?
12 colourways are currently in production under codes JT2005, JT2052, JT2206, JT2031, JT2043 and 7 more. Full swatch sets can be requested before you commit to a container order.
What thickness and sheet size does Saw Table Wood come in?
Saw Table Wood panels are supplied at 2–4 mm in sheet sizes 1200×300 · 1360×600 · 1500×600 · 1200x3000mm, weighing 3.0–10.5 kg/m². Other sizes in the TooFlexi range are 600×1200 mm and 1200×2400 mm.
Is Saw Table Wood suitable for exterior cladding?
Yes. TooFlexi flexible stone is A2 class (GB 8624, factory tested) and can be specified to meet EN 13501-1 A2-s1,d0. The surface is UV-stabilised and waterproof for non-immersed exposure, so it performs outdoors in hot, humid and coastal conditions.
What is the minimum order quantity for Saw Table Wood?
The MOQ is 200 m² per colour, with a standard lead time of 15–25 business days. Samples are available for evaluation before you place a bulk order.
Can Saw Table Wood be used on curved surfaces?
Yes. Panels bend around curves with a radius of at least 200 mm, which covers column wraps, radiused walls and curved reception counters without cutting to shape.
Related Guides and Products
Parent collection: Simulation Series
- Saw Table Wood JT2005
- Saw Table Wood JT2052
- Saw Table Wood JT2206
- Saw Table Wood JT2031
- Saw Table Wood JT2043
- Saw Table Wood JT2025
Further reading:
