Flexible Stone Veneer for Trade Show Booths and Pop-Up Walls A 3 m × 3 m booth shows roughly 36 m² of wall. Tile that, and you buy freight, pallets and a two-day build crew. Face it in painted MDF and you bin most of it on Sunday night. Exhibit four or five times a
Flexible Stone Veneer for Trade Show Booths and Pop-Up Walls Read More »
Flexible Stone Panels: Where They Earn Their Keep, and Where They Don’t A flexible stone panel is a 1–3 mm slice of real stone — travertine, slate, marble — bonded to a fiberglass backing. The result is a sheet 2–9 mm thick that bends around a column and weighs 3.0–10.5 kg/m². People call it veneer,
Flexible Stone Panels: Where They Earn Their Keep Read More »
Movement Joints & Expansion Details for Flexible Stone Veneer Thin does not mean still. A 3–6 mm flexible stone veneer rides the wall it is bonded to, and that wall moves. Skip the joints and the movement finds the one place nobody wants it: a hairline crack running clean across a finished elevation. Most crews
Movement Joints & Expansion Details for Flexible Stone Veneer Read More »
MCM Flexible Stone Thickness Selection: Which 2–9 mm Grade for Which Job Thickness on a flexible stone panel is not a cosmetic choice. Not decorative. It changes how much abuse the surface takes, how heavy the consignment is, and how forgiving the sheet is over a less-than-perfect wall. Most specifiers pick a number because it
MCM Flexible Stone Thickness Selection: Which 2-9 mm Grade for Which Job Read More »
MCM Flexible Stone Failure Diagnosis: Cracking, Hollow Spots and Delamination A wall clad two years ago starts sounding hollow when you tap it. A corner lifts. Hairline cracks appear along a joint that looked perfect at handover. Nobody agrees on whose fault it is: the contractor blames the material, the supplier blames the substrate, the
MCM Flexible Stone Failure Diagnosis: Cracking, Hollow Spots and Delamination Read More »
Putting MCM Flexible Stone Over External Wall Insulation (ETICS / EIFS) A 1970s block gets insulated. The render goes on, the building stops leaking heat, and the elevation now looks like a rendered 1970s block. The obvious fix — real stone — was never an option, because 40 kg/m² of stone does not hang off
Putting MCM Flexible Stone Over External Wall Insulation (ETICS / EIFS) Read More »
MCM Flexible Stone Incoming Inspection: The Acceptance Checklist Nobody Writes Down A container arrives. Someone signs the delivery note, the pallets go into a site container, and three weeks later the installer opens carton 14 of 40 and finds a different colour. Now the facade is half clad, the rest of the lot is on
MCM Flexible Stone Incoming Inspection: The Acceptance Checklist Nobody Writes Down Read More »
Specifying MCM Flexible Stone Veneer: What Actually Belongs in the Spec Most specifications for flexible stone veneer are copied from a ceramic tile spec and signed off. Then the panel arrives at 3 mm instead of the 6 mm that was approved. The adhesive is the wrong class. The primer sealed the wall instead of
Specifying MCM Flexible Stone Veneer: What Actually Belongs in the Spec Read More »
Most flexible stone call-backs do not start with the sheet. They start with the wall. A 2–9 mm MCM panel shows every flaw underneath it — a low spot, a dusty skim coat, a wall that was never dry. Get the substrate wrong and the best adhesive in the world will not save the job.
MCM Flexible Stone Substrate Preparation & Bonding Guide Read More »
A module leaves the factory on a truck, gets craned onto a foundation, and is weathertight the same afternoon. That schedule is the whole point of offsite construction. It also breaks most of the assumptions baked into a traditional cladding spec. Natural stone is too heavy to travel on a finished wall. Rigid tile cracks
MCM Flexible Stone for Modular & Offsite Construction Read More »
