Hemp Weave at a glance: 12 colourways, 4–6 mm thick, sheet sizes 600×1500 · 1200x2700mm, 3.0–10.5 kg/m², A2 class (GB 8624, factory tested). MOQ 200 m² per colour, lead time 15–25 business days.
What the Hemp Weave Series Is
Hemp Weave reproduces woven plant fibre: crossing strands, a visible weave rhythm and the slight irregularity that hand-woven material carries. As a Simulation Series panel it supplied at 4–6 mm, which is enough body to hold the weave relief without the panel becoming rigid.
Like every TooFlexi panel, Hemp Weave is a mineral composite formed by mould pressing and 3D surface technology, not a slice of quarried stone bonded to a backing. That is what keeps the weight at 3.0–10.5 kg/m² — roughly 80% lighter than natural stone — and it is also why colour and structure stay consistent from batch to batch, which quarried stone cannot guarantee.
Hemp Weave Colour Range — All 12 Codes
Measured across the actual panel images, the 12 colourways fall into 8 tone families — Cream, Off-White, Light Grey, Ochre, Warm Beige, Tan, Mid Grey and Charcoal. Lightness runs from Off-White (#E6E6E4) to Charcoal (#2F2F2F), so the series covers both high-key and low-key schemes.
MB2005Off-White
MB2052Off-White
MB2025Off-White
MB2054Ochre
MB001Cream
MB2221Light Grey
MB2056Warm Beige
MB2206Light Grey
MB2031Mid Grey
MB2089Tan
MB2038Charcoal
MB2043CharcoalEvery code above opens its own specification page with full thickness, size and application data. Not sure which to shortlist? Order a swatch set and compare them in your own lighting.
Technical Specifications
| Series | Hemp Weave (Simulation Series) |
|---|---|
| Colourways in production | 12 |
| Thickness | 4–6 mm |
| Sheet sizes | 600×1500 · 1200x2700mm |
| Weight | 3.0–10.5 kg/m² (approx. 80% lighter than natural stone) |
| Material | MCM flexible stone (mineral-based composite) |
| Fire classification | A2 class (GB 8624, factory tested); can be specified to meet EN 13501-1 A2-s1,d0 |
| Minimum bend radius | 200 mm |
| Adhesive consumption | approx. 3–4 kg/m², polymer-modified |
| MOQ | 200 m² per colour |
| Lead time | 15–25 business days |
Where Hemp Weave Panels Are Specified
Hemp Weave is used for hotel lobbies and feature walls, restaurant and retail interiors, office reception areas, residential accent walls, bathroom and wet-area surrounds (non-immersed), elevator lobbies and column wraps. Because the material is A2 class (GB 8624, factory tested), it is also accepted on high-rise exteriors and public buildings where combustible cladding is restricted.
Installation Notes for 4–6 mm Hemp Weave Panels
At 4–6 mm these panels carry enough body to hold a deeper surface relief while still bending to a 200 mm radius. Because the panel is thicker, joints are butted rather than lapped, and the extra edge depth gives a cleaner shadow line at the seam. Bond with a polymer-modified adhesive at roughly 3–4 kg/m² to cement board, plasterboard, prepared masonry or sound existing tile; cut with a utility knife or angle grinder, no wet saw required.
No steel keel and no structural reinforcement are needed at 3.0–10.5 kg/m². A single installer can handle large formats unaided, and a typical 200 m² area is completed in 2–3 days.
Frequently Asked Questions
How many colours does the Hemp Weave series come in?
12 colourways are currently in production under codes MB001, MB2005, MB2052, MB2025, MB2221 and 7 more. Full swatch sets can be requested before you commit to a container order.
What thickness and sheet size does Hemp Weave come in?
Hemp Weave panels are supplied at 4–6 mm in sheet sizes 600×1500 · 1200x2700mm, weighing 3.0–10.5 kg/m². Other sizes in the TooFlexi range are 600×1200 mm and 1200×2400 mm.
Is Hemp Weave suitable for exterior cladding?
Yes. TooFlexi flexible stone is A2 class (GB 8624, factory tested) and can be specified to meet EN 13501-1 A2-s1,d0. The surface is UV-stabilised and waterproof for non-immersed exposure, so it performs outdoors in hot, humid and coastal conditions.
What is the minimum order quantity for Hemp Weave?
The MOQ is 200 m² per colour, with a standard lead time of 15–25 business days. Samples are available for evaluation before you place a bulk order.
Can Hemp Weave be used on curved surfaces?
Yes. Panels bend around curves with a radius of at least 200 mm, which covers column wraps, radiused walls and curved reception counters without cutting to shape.
Related Guides and Products
Parent collection: Simulation Series
- Hemp Weave MB001
- Hemp Weave MB2005
- Hemp Weave MB2052
- Hemp Weave MB2025
- Hemp Weave MB2221
- Hemp Weave MB2206
Further reading:
