35 Block Stone at a glance: 7 colourways, 2–9 mm thick, sheet sizes 300×600 · 600x1200mm, 3.0–10.5 kg/m², A2 class (GB 8624, factory tested). MOQ 200 m² per colour, lead time 15–25 business days.
What the 35 Block Stone Series Is
35 Block Stone is a modular block pattern — regular units with recessed joints, closer to dressed masonry than to quarried stone. It is the most geometric group in the Simulation category and is typically used where a project wants an ordered, architectural grid.
Like every TooFlexi panel, 35 Block Stone is a mineral composite formed by mould pressing and 3D surface technology, not a slice of quarried stone bonded to a backing. That is what keeps the weight at 3.0–10.5 kg/m² — roughly 80% lighter than natural stone — and it is also why colour and structure stay consistent from batch to batch, which quarried stone cannot guarantee.
35 Block Stone Colour Range — All 7 Codes
Measured across the actual panel images, the 7 colourways fall into 4 tone families — Off-White, Mid Grey, Warm Beige and Charcoal. Lightness runs from Off-White (#EEEEEE) to Charcoal (#363739), so the series covers both high-key and low-key schemes.
TS2005Off-White
TS2052Off-White
TS2056Warm Beige
TS2602Mid Grey
TS2031Mid Grey
TS2315Charcoal
TS2043CharcoalEvery code above opens its own specification page with full thickness, size and application data. Not sure which to shortlist? Order a swatch set and compare them in your own lighting.
Technical Specifications
| Series | 35 Block Stone (Simulation Series) |
|---|---|
| Colourways in production | 7 |
| Thickness | 2–9 mm |
| Sheet sizes | 300×600 · 600x1200mm |
| Weight | 3.0–10.5 kg/m² (approx. 80% lighter than natural stone) |
| Material | MCM flexible stone (mineral-based composite) |
| Fire classification | A2 class (GB 8624, factory tested); can be specified to meet EN 13501-1 A2-s1,d0 |
| Minimum bend radius | 200 mm |
| Adhesive consumption | approx. 3–4 kg/m², polymer-modified |
| MOQ | 200 m² per colour |
| Lead time | 15–25 business days |
Where 35 Block Stone Panels Are Specified
35 Block Stone is used for hotel lobbies and feature walls, restaurant and retail interiors, office reception areas, residential accent walls, bathroom and wet-area surrounds (non-immersed), elevator lobbies and column wraps. Because the material is A2 class (GB 8624, factory tested), it is also accepted on high-rise exteriors and public buildings where combustible cladding is restricted.
Installation Notes for 2–9 mm 35 Block Stone Panels
Thickness in this series varies with the relief: shallow textures are pressed thinner, deep textures thicker, across a 2–9 mm range. Thinner sheets bend to a 200 mm radius; the deeper ones should be kept to flat or gently curved substrates. Bond with a polymer-modified adhesive at roughly 3–4 kg/m² to cement board, plasterboard, prepared masonry or sound existing tile, and cut with a utility knife or angle grinder — no wet saw, no specialist tooling.
No steel keel and no structural reinforcement are needed at 3.0–10.5 kg/m². A single installer can handle large formats unaided, and a typical 200 m² area is completed in 2–3 days.
Frequently Asked Questions
How many colours does the 35 Block Stone series come in?
7 colourways are currently in production under codes TS2005, TS2052, TS2602, TS2056, TS2031 and 2 more. Full swatch sets can be requested before you commit to a container order.
What thickness and sheet size does 35 Block Stone come in?
35 Block Stone panels are supplied at 2–9 mm in sheet sizes 300×600 · 600x1200mm, weighing 3.0–10.5 kg/m². Other sizes in the TooFlexi range are 600×1200 mm and 1200×2400 mm.
Is 35 Block Stone suitable for exterior cladding?
Yes. TooFlexi flexible stone is A2 class (GB 8624, factory tested) and can be specified to meet EN 13501-1 A2-s1,d0. The surface is UV-stabilised and waterproof for non-immersed exposure, so it performs outdoors in hot, humid and coastal conditions.
What is the minimum order quantity for 35 Block Stone?
The MOQ is 200 m² per colour, with a standard lead time of 15–25 business days. Samples are available for evaluation before you place a bulk order.
Can 35 Block Stone be used on curved surfaces?
Yes. Panels bend around curves with a radius of at least 200 mm, which covers column wraps, radiused walls and curved reception counters without cutting to shape.
Related Guides and Products
Parent collection: Simulation Series
- 35 Block Stone TS2005
- 35 Block Stone TS2052
- 35 Block Stone TS2602
- 35 Block Stone TS2056
- 35 Block Stone TS2031
- 35 Block Stone TS2043
Further reading:
