Travertine at a glance: 34 colourways, 2–3 mm thick, sheet sizes 600×1200 · 1200×2400 · 1200x3000mm, 3.0–10.5 kg/m², A2 class (GB 8624, factory tested). MOQ 200 m² per colour, lead time 15–25 business days.
What the Travertine Series Is
Travertine is a sedimentary stone laid down in mineral springs: it carries open, elongated voids and banded beds that run in one direction across the slab. The TooFlexi Travertine Series reproduces that directional grain and its pitted surface through mould pressing and 3D surface technology, so the panel reads as stone at normal viewing distance rather than as a printed pattern.
Like every TooFlexi panel, Travertine is a mineral composite formed by mould pressing and 3D surface technology, not a slice of quarried stone bonded to a backing. That is what keeps the weight at 3.0–10.5 kg/m² — roughly 80% lighter than natural stone — and it is also why colour and structure stay consistent from batch to batch, which quarried stone cannot guarantee.
Travertine Colour Range — All 34 Codes
Measured across the actual panel images, the 34 colourways fall into 8 tone families — Off-White, Light Grey, Warm Off-White, Cream, Warm Beige, Ochre, Charcoal and Mid Grey. Lightness runs from Cream (#F3F0E8) to Charcoal (#454545), so the series covers both high-key and low-key schemes.
DS2052KZCream
DS2005Off-White
DS2052Off-White
DS009Warm Off-White
DS001Off-White
DS05052Off-White
DS006Off-White
DS05053Warm Off-White
DS2054Ochre
DS05030Off-White
DS005Off-White
DS05025Off-White
DS2221Off-White
DS05055Warm Off-White
DS004Cream
DS002Light Grey
DS003Warm Off-White
DS05203Warm Off-White
DS008Light Grey
DS05031Light Grey
DS05054Warm Beige
DS2206Light Grey
DS05231Light Grey
DS2056Warm Beige
DS031YZQDLight Grey
DS2058Warm Beige
DS05209Warm Off-White
DS007Light Grey
DS2089Warm Beige
DS052KZQDWarm Beige
DS2031YZLight Grey
DS2031Mid Grey
DS2038Charcoal
DS2043CharcoalEvery code above opens its own specification page with full thickness, size and application data. Not sure which to shortlist? Order a swatch set and compare them in your own lighting.
Technical Specifications
| Series | Travertine (Rock Series) |
|---|---|
| Colourways in production | 34 |
| Thickness | 2–3 mm |
| Sheet sizes | 600×1200 · 1200×2400 · 1200x3000mm |
| Weight | 3.0–10.5 kg/m² (approx. 80% lighter than natural stone) |
| Material | MCM flexible stone (mineral-based composite) |
| Fire classification | A2 class (GB 8624, factory tested); can be specified to meet EN 13501-1 A2-s1,d0 |
| Minimum bend radius | 200 mm |
| Adhesive consumption | approx. 3–4 kg/m², polymer-modified |
| MOQ | 200 m² per colour |
| Lead time | 15–25 business days |
Where Travertine Panels Are Specified
Travertine is used for hotel lobbies and feature walls, restaurant and retail interiors, office reception areas, residential accent walls, bathroom and wet-area surrounds (non-immersed), elevator lobbies and column wraps. Because the material is A2 class (GB 8624, factory tested), it is also accepted on high-rise exteriors and public buildings where combustible cladding is restricted.
Installation Notes for 2–3 mm Travertine Panels
At 2–3 mm these are among the thinnest panels in the range, and they conform to curved substrates down to a 200 mm radius — column wraps, radiused reception desks and curved corridor walls are all achievable without cutting to shape. The substrate must be flat and sound: cement board, plasterboard, prepared masonry or sound existing tile. Bond with a polymer-modified adhesive at roughly 3–4 kg/m², and cut on site with a utility knife or angle grinder — no wet saw, no specialist tooling.
No steel keel and no structural reinforcement are needed at 3.0–10.5 kg/m². A single installer can handle large formats unaided, and a typical 200 m² area is completed in 2–3 days.
Frequently Asked Questions
How many colours does the Travertine series come in?
34 colourways are currently in production under codes DS001, DS002, DS003, DS004, DS005 and 29 more. Full swatch sets can be requested before you commit to a container order.
What thickness and sheet size does Travertine come in?
Travertine panels are supplied at 2–3 mm in sheet sizes 600×1200 · 1200×2400 · 1200x3000mm, weighing 3.0–10.5 kg/m². Other sizes in the TooFlexi range are 600×1200 mm and 1200×2400 mm.
Is Travertine suitable for exterior cladding?
Yes. TooFlexi flexible stone is A2 class (GB 8624, factory tested) and can be specified to meet EN 13501-1 A2-s1,d0. The surface is UV-stabilised and waterproof for non-immersed exposure, so it performs outdoors in hot, humid and coastal conditions.
What is the minimum order quantity for Travertine?
The MOQ is 200 m² per colour, with a standard lead time of 15–25 business days. Samples are available for evaluation before you place a bulk order.
Can Travertine be used on curved surfaces?
Yes. Panels bend around curves with a radius of at least 200 mm, which covers column wraps, radiused walls and curved reception counters without cutting to shape.
Related Guides and Products
Parent collection: Rock Series
Further reading:
